Details
Specification
| Channels | 2 |
| Net supply | 230 V |
| Power supply | 300 W |
| Protection class | I |
| Fuse | T500 mA (230 V/50/60 Hz) |
| Fuse overcurrent release | 1.6 A |
| Temperature control of channels |
Soldering and desoldering tool, continuously variable from 50°C - 550°C (150°F - 999°F) Temperature control range is tool independent Soldering iron WP 80/WP 120: 50°C - 450°C (150°F - 850°F) Soldering iron WP 200/WAP 150: 50°C - 550°C (150°F - 950°F) Desoldering iron DSX 80/DXV 80/DSX 120: 50°C - 450°C (150°F - 850°F) Hot air iron HAP 1: 50°C - 550°C (150°F - 950°C) |
| Temperature accuracy | ± 9°C (± 17°F) |
| Temperature stability | ± 2°C (± 4°F) |
| Bleeder | Soldering tip (Tip to ground) conforms IPC-J-001 |
| Bleeder voltage | Soldering tip (Tip to ground) conforms IPC-J-001 |
| Pump | (periodic duty 30/30s) |
| Max. vacuum | 0.7 bar |
| Max. delivery rate | max. 10 l/min |
| Hot air | max. 15 l/min |
| Display | LCD |
| Temperature control | Buttons |
| Equipotentional bonding | Via 3.5 mm pawl socket at the back of device (hard grounded normal state) |
| USB interface | No |
Rework - Soldering, Desoldering and Hot air
One station meets the requirements of a rework workplace
Unique connecting compatibility of all tools
3 respectively 2 independend tool channels with automatic tool recognition guarantee the simultanuous operation of 2 to 3 soldering tools
Tools are permanently ready for use
View more about WR 2000A Set on main site